7
PROGRAMS REPLACEMENT
7.1.2 Change PLC type
Change PLC type is a function for changing existing data to data for other programmable controller
series for reuse.
This function changes the target programmable controller type of the data that is read to GX Developer.
Some instructions that cannot be automatically converted are changed to OUT SM1255. Search for
these instructions or SM1255 devices in the converted program and modify the program manually.
In addition, programs and parameters need to be reviewed regarding intelligent function module and
network modules.
(1) Convertible range from ACPU using GX Developer
The following list shows the convertible range from ACPU to other programmable controllers.
Product name
GX Developer
*1
Changing of PLC type from the existing CPU module to the High-speed Universal model QCPU is not supported in GX
Developer.
(2) GX Developer operation
(a) Select "Change PLC type" in the "Project" menu.
7
- 6
Change source
Change target programmable controller
programmable
ACPU/AnSCPU
controller
ACPU
QnACPU/QnA-
QCPU
SCPU
*1