7
PROGRAMS REPLACEMENT
(b) Specify the target programmable controller type in the "Change PLC type" dialogue.
Click the [OK] button after setting the PLC type.
(c) Select the conversion method of the special relay/register.
Specify the conversion destination of the special relay/register (ACPU: M9000/D9000 models) device.
Please check the box next to [Convert M9000/D9000 - Q/L/QnACPU special devices].
• Checked: Converted to a device for the Basic model QCPU.
• Not checked: Converted to A compatible (SM1000/SD1000 models).
The box state is fixed to be checked when the Universal model QCPU is selected.
After specifying the destination of the device conversion, Change PLC type is executed by pressing the
[Yes] or [Confirm Change] button.
• [Yes]: Executed without conducting intermediate steps and user confirmation.
• [Confirm Change]: Asks user confirmation to execute changes.
PLC series setting
PLC type setting
7
- 7