Mitsubishi Electric MELSEC-A0J2H Series Handbook page 201

Table of Contents

Advertisement

Specifications
5VDC internal current
105mA (TYP. All points are ON.)
consumption
External
supply
Voltage
power
(Module
power
Current
supply)
External connection
36-point terminal block connector
method
Applicable wire size
(Applicable tightening torque 69N•cm)
1.25-3, 1.25-YS3A, 2-S3,
Applicable solderless
2-YS3A, V1.25-3, V1.25-YS3A,
terminal
V2-S3, V2-YS3A
Weight
External dimensions
250(H) × 132(W) × 41(D)mm
*1
The figure below shows the derating chart of the renewal tool for A0J2.
For the derating chart of the I/O module on the programmable controller side, which is to be connected to the renewal tool
for A0J2, refer to the user's manual for the module to be used.
*2
The value when using the input module QX41, etc. and 1ms is set at input response time in I/O assignment setting of PLC
parameter (10ms is set at default).
*3
The weight of fixed stand of programmable controller depends on replacement type of renewal tool for A0J2.
*4
The external dimensions of the SC-A0JQIF32D do not include those of its projection.
A0J2-E32D
None
Ripple voltage 4Vp-p or less
None
36-point terminal block connector
(M3 × 6 screws)
2
0.75 to 2mm
(Applicable tightening torque 69N•cm)
1.25-3, 1.25-YS3A, 2-S3,
2-YS3A, V1.25-3, V1.25-YS3A,
0.63kg
182(H) × 132(W) × 41(D)mm
(%)
100
90
80
Simultaneous ON
70
ratio at DC input
60
50
40
30
40
Ambient temperature
: Compatible,
SC-A0JQIF32D
Compatibility
24VDC±10%
×
200mA
×
(M3 × 6 screws)
2
0.75 to 2mm
V2-S3, V2-YS3A
0.34kg
*4
×
26.4VDC
External power supply
(module power supply)
50 55 (­)
: Partially changed, × : Incompatible
Precautions for replacement
To deliver a power for programmable
controller operation, connecting a
module power supply to the interface
module, TB35 or TB36 is required.
If the voltage exceeds existing power
capacity, add 24VDC power supply
separately.
Also consider the weight of fixed stand
*3
of programmable controller.
Check the dimensions since they
depend on the installation type
(building-up/horizontal/separate type).
App
- 6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec q series

Table of Contents