Mitsubishi Electric MELSEC-A0J2H Series Handbook page 235

Specifications
5VDC internal current
225mA (TYP. All points are ON.)
consumption
External
Voltage
supply
power
(Module
power
Current
supply)
External connection 36-point terminal block connector
method (M3 × 6 screws) 2 pieces
Applicable wire size
(Applicable tightening torque 69N•cm)
1.25-3, 1.25-YS3A, 2-S3,
Applicable solderless
2-YS3A, V1.25-3, V1.25-YS3A,
terminal
V2-S3, V2-YS3A
Weight
External dimensions 250(H) × 190(W) × 41(D)mm
*1 The value when using the input module, QX41Y41P, QX41, etc. and 5ms is set at input response time in I/O assignment
setting of PLC parameter (10ms is set at default).
*2 The value when using the output module, QX41Y41P, QY41P, etc.
*3 The weight of fixed stand of programmable controller depends on replacement type of renewal tool for A0J2.
*4 The external dimensions of the SC-A0JQIF56DT do not include those of its projection.
A0J2-E56DT
None
Ripple voltage 4Vp-p or less
None
36-point terminal block connector
(M3 × 6 screws) 2 pieces
2
0.75 to 2mm
(Applicable tightening torque 69N•cm)
1.25-3, 1.25-YS3A, 2-S3,
2-YS3A, V1.25-3, V1.25-YS3A,
1.04kg
182(H) × 190(W) × 41(D)mm
: Compatible,
SC-A0JQIF56DT Compatibility
– –
24VDC±10%
×
260mA ×
2
0.75 to 2mm
V2-S3, V2-YS3A
0.49kg
*4
×
: Partially changed, × : Incompatible
Precautions for replacement
To deliver a power for programmable
controller operation, connecting a
module power supply to the interface
module, TB35 or TB36 is required.
If the voltage exceeds existing power
capacity, add 24VDC power supply
separately.
Also consider the weight of fixed stand
*3
of programmable controller.
Check the dimensions since they
depend on the installation type
(building-up/horizontal/separate type).
App
- 40