Putting The Unit Into Service - Henny Penny FlexFusion FPE-615 Operator's Manual

Requirement
4

Putting the unit into service

➢ Any remaining packaging removed from the cooking zone
➢ Protective film pulled off the housing
a) Clean the unit.
b) Enter the data on the nameplateNameplate [➙ 80].
c) Switch on the unit and select the cooking program
"Manual cooking: menu.
d) Set the temperature to 200°C (392°F) Setting the cooking temperature
[➙ 46].
⇨ Operate the unit for 20 minutes.
Putting the unit into service
Combisteaming
4
in the
31