Simplex/Duplex Setting; To Make Double-Sided Copies Using Adf - Konica Minolta bizhub 360 User Manual

Hide thumbs Also See for bizhub 360:

Table of Contents

Simplex/Duplex Setting

This section describes how to make double-sided copies from the original

scanned from the ADF or from the original glass, and also to make single-

sided copies from double-sided original.

The machine is initially set to make a single-sided copy from single-sided

original (1%1) as factory default.

Follow the procedure below to make double-sided copies from single-sided

or double-sided original using the ADF.

0 Specify the Original Direction according to the orientation of the original

loaded in the ADF. For details, see "Specifying Orientation of Original

(Original Direction)" on page 4-12.

0 With 2%2 selected, the desired copy result may not be obtained from the

following types of double-sided original unless the original page margin

is specified manually.

8-1/2 × 11 or smaller portrait-type original with top margin created

8-1/2 × 11 or smaller landscape-type original with right/left margin creat-

8-1/2 × 14 or larger portrait-type original with right/left margin created

8-1/2 × 14 or larger landscape-type original with top margin created

For details, see "Specifying Position of Binding Margin (Margin)" on

0 When selecting 1%2 or 2%2 and making double-sided copies with top

margin created (arranged upside down on the reverse side), the binding

direction can be specified using the [Binding Direction] key,

Basic Copy Operations