To Copy Using Punch Mode - Konica Minolta bizhub 360 User Manual

6
Key

To copy using Punch mode

0 If Punch is to be selected, select the orientation in which the original is
positioned and the orientation of the page to be punched, otherwise the
copies may not be punched as desired.
0 This mode is available in combination with Group, Sort + Offset, Group +
Offset, or Staple mode.
0 If punch position setting is different from the binding position specified in
Page Margin of Application setting, the punch position is given priority.
0 With Auto selected on the Punch Position popup menu, the punch posi-
tion will be determined automatically to the longer side for 8-1/2 × 11
copy paper, or to the shorter side for copy paper larger than 8-1/2 × 11.
0 Be sure that the side guide plates of the paper tray are securely aligned
to the paper; otherwise the copies may not be punched in position.
0 Available paper weight for Punch Unit PU-501 mounted on Finisher FS-
510 is 15 to 24 lb, while paper weight for Finisher FS-511 is 16 to 24 lb.
For details of other specifications, see page 9-3.
0 If the ATS (Automatic Tray Switching) functions while the machine uses
the Punch mode, the punch holes may be slightly off the appropriate po-
sitions.
0 Do not punch special paper type such as overhead projection transpar-
ent films, labels, etc.Otherwise, machine trouble may occur.
0 Each output tray of Finisher FS-510 and FS-511 has a limit in capacity.
Be careful not to exceed the limit. For details, see "Paper Tray/ Output
Tray Capacity" on page 9-4.
1
Position the original to be copied.
2
Using the keypad, enter the desired number of copies.
3
Touch [Combine Originals] tab on the Basic Screen, then make Original
Direction and Margin settings.
– For setting Original Direction, see "Specifying Orientation of Origi-
nal (Original Direction)" on page 4-12.
6-16
Sample
Finishing/Folding
bizhub 360