Turning Off The Machine - Konica Minolta bizhub 360 User Manual

Before Making Copies
!
Detail
Default settings are those settings that have not been changed since the
power is turned on, or that are available after pressing [Reset] to reset all
the previously specified settings.
The default settings can be changed. For details, refer to page 14-27.
The factory default settings are the settings that were set when this ma-
chine was shipped from the factory.

Turning off the machine

0 The main power is normally to be kept turned on. Turning it off will termi-
nate all the functions including printing, and receiving and outputting fac-
simile data.
0 Do not turn off the main power while queued jobs or stored jobs are still
pending to be printed.Otherwise, data that are yet to be printed out will
be deleted.
0 Do not turn off the main power or sub power while printing is in
progress.Otherwise it will cause paper misfeeds.
0 Do not turn off the main power or sub power while scanning originals or
transmitting image data.Otherwise, data whose handling has yet to be
completed will be deleted.
1
Turn off the sub power.
– The sub power
switch is located on
the right side surface
of the control panel.
– Press the sub power
switch to turn it off.
The display on the touch panel goes off, and all the lights are turned off
except for the main power indicator.
bizhub 360
2
2-31