Konica Minolta bizhub 360 User Manual page 622

15
– Select [Reset] to initialize the current settings and to clear the cur-
rent account and password when key counter is removed.
4
Specify the reset setting for original change.
Select whether or not to initialize the previous job settings when origi-
nal document is loaded into the ADF.
– Touch [When Original is set on ADF] to display the setting menu on
the right side of the screen.
– Select [Reset] to initialize the previous job settings when original is
loaded into the ADF. Copy settings are to be made each time the
original document is loaded into the ADF.
5
Specify the setting for job change.
Select whether or not to release the Staple Setting and Original Set/
Bind Direction, and to reset all the setting data after completion of each
job.
– Touch [When NEXT JOB is selected] to display the Next Job
Screen.
– Touch the key to be specified. The setting menu will be displayed
on the right side of the screen.
Select either [ON] or [OFF] for each.
6
If further changes are required, touch the desired key.
15-76
Utility <Administrator Setting>
bizhub 360