Setting Up The Pc-Fax Tx Environment; Enabling Device Information To Be Obtained From The Fax Driver - Konica Minolta bizhub C3850FS User Manual

2

Setting up the PC-Fax TX environment

Set up the operating environment to suit the printing method.
If the printing method is not specified before installation, Normal Printing (Port 9100) is selected for printing.
Use Normal Printing (Port 9100) unless otherwise specified.
For details on how to configure settings, refer to Chapter 1 in [User's Guide Applied Functions].
Printing method
Normal Printing (Port
9100)
Internet Printing (IPP)
Secure Printing (IPPS)
Tips
-
If you are using Windows Vista/7/8/Server 2008/Server 2008 R2/Server 2012, you cannot set up the
Secure Printing (IPPS) using the installer.
- If you are using Windows Server 2003 in an IPv6 environment, you cannot set up the Secure Printing
using the installer.
- Internet Printing (IPP) is not supported in the IPv6 environment.

Enabling device information to be obtained from the fax driver

Disable the OpenAPI authentication function. (Usually, you can use the default settings.)
If device information collection from the fax driver is enabled, the fax driver automatically collects the infor-
mation such as optional device attachment and authentication settings.
For details on how to configure settings, refer to Chapter 1 in [User's Guide Applied Functions].
2-5
Before installing the fax driver (for administrators)
Description
Make sure that the RAW port number has been set. (Usually, you can use the
default settings.)
Check the IPP operating environment. (Usually, you can use the default set-
tings.)
Set up the IPPS operating environment. Establish the communication with SSL
encryption between this machine and the computer.
bizhub C3850FS/C3850/C3350
2.2