Icons Shown In The Icon Display Area - Konica Minolta bizhub 360 User Manual

2
No. Name
12 [Save in User Box]
13 [Folding]
14 [Finishing]
15 Image display area
16 Simplex/Duplex setting area
17 Zoom setting area
18 Density setting area
19 Paper setting area
20 Icon display area

Icons shown in the icon display area

Icon
2-26
Description
Touched while outputting scanned original data to save
the data in a box. Also used to further specify the box
where the data is to be saved and whether or not the data
is printed when it is saved. For details, refer to the Box
Operations of the bizhub 360 User's Guide. (Only availa-
ble when Hard Disk HD-505 is installed.)
Touched to specify the Half Fold and Fold & Staple set-
tings. (Only available when Saddle Stitcher SD-502 is in-
stalled.)
Touched to specify the output settings other than fold-
ing.The settings include:
Output tray, paper orientation, sort/group and crisscross,
staple/punch and positions (the availability varies de-
pending on the options installed).
Displays the specified staple and punch hole settings.
Touching [1%2], [2%2], or [2%1] will display the Bind &
Orig Direction key to allow settings for the orientation of
positioned original and binding direction of copy/original.
Touched to use the Fixed Zoom, Set Zoom, Zoom with
Constant X and Y Ratio, Independent Zoom, or Auto
Zoom, or to define the Set Zoom with desired zoom ra-
tios.
Touched to specify copy density.
Touched to select a paper tray or to specify the Auto Pa-
per Select settings. Also used when specifying the paper
type and size that is set in the bypass tray.
Displays icons that show jobs and machine status.
Description
Indicates that data is being sent from the machine, regardless of the cur-
rent mode.
Indicates that data is being received by the machine, regardless of the
current mode.
If the warning screen was closed when a warning occurred, touch this
key to display the warning screen again.
Before Making Copies
bizhub 360