Automatically Returning To The Default Settings (Automatic Panel Reset); Automatically Returning To The Priority Screen (Automatic System Reset) - Konica Minolta bizhub 360 User Manual

Before Making Copies

Automatically Returning to the Default Settings (Automatic Panel Reset)

If the [Reset] key is not pressed and no operation is performed for a specified
length of time, the copy settings that have not been specified are cleared and
the machine returns to the default settings.
This is the Automatic Panel Reset.
As the factory default, Automatic Panel Reset activates after 1 minute.
!
Detail
The length of time until the automatic panel reset operation is performed
and whether or not it is performed can be set in the Utility mode. For de-
tails, refer to page 15-71.
Automatically Returning to the Priority Screen (Automatic System Re-
set)
If no operation is performed for a specified length of time, the screen is au-
tomatically changed to that for the mode given priority.
This is the automatic system reset operation.
The priority screen can be set either to that for copying functions or to that
for scanning functions.
As the factory default, the Copy Mode Screen is displayed after 1 minute.
!
Detail
Use the Utility mode to specify the length of time before the automatic
system reset is activated, or to give priority to a screen. For details, refer
to page 15-69.
bizhub 360
2
2-33