Control Panel - Konica Minolta bizhub 360 User Manual

2

Control Panel

1
24 23 22
No. Name
1 [Power Save] key
2 Touch panel
3 [Access] key
4 [Box] key
5 [Fax] key
6 [Scan] key
7 [Copy] key
8 [Interrupt] key
9 [Reset] key
2-20
2
21
Description
When the [Power Save] indicator is lit, press to activate
the machine.Vice versa, press to manually change to the
power save mode.
Displays various screens and messages.Specify the vari-
ous settings by directly touching the Touch Panel.
If user authentication or account track settings have been
applied, press this key after completing entering the user
name and password (user authentication) or the account
name and password (account track), so as to use the ma-
chine.
Press to enter the Box mode. While the machine is in the
Box mode, the indicator on the [Box] key lights up in
green. For details, refer to Box Operations of the bizhub
360 User's Guide.
Press to enter the Fax mode. While the machine is in the
Fax mode, the indicator on the [Fax] key lights up in
green. For details, refer to Fax Operations of the bizhub
360 User's Guide.
Press to enter the Scan mode. While the machine is in the
Scan mode, the indicator on the [Scan] key lights up in
green. For details, refer to Network Scanner Operations of
the bizhub 360 User's Guide.
Press to enter the Copy mode. (This machine is default to
the Copy mode.) While the machine is in the Copy mode,
the indicator on the [Copy] key lights up in green.
Press to change modes from the Copy, Print, or Scan
mode.When pressed, the indicator on the [Interrupt] key
lights up in green.
Resets all the settings specified using the control panel
and the touch panel. (Stored settings are not reset by this
key.)
Before Making Copies
3 4 5 6 7
20 19 18 17 16 15
8 9 10
14 13 12 11
bizhub 360