Incompatible Copy Settings; To Give Priority To The Copy Setting Specified Following The First Setting - Konica Minolta bizhub 360 User Manual

2
2.7

Incompatible Copy Settings

Some copy settings cannot be combined and used together at the same
time. Priority is given to those settings that must not be combined. The ma-
chine responds as follows if multiple copy settings that must not be com-
bined are specified.
- If the priority for the setting specified first is lower than that for the setting
specified next, the first setting will be cancelled automatically.
- If the priority for the setting specified first is higher than that for the setting
specified next, the machine prompts the user with the message stating
that the settings must not be combined, and then cancels the second
setting.

To give priority to the copy setting specified following the first setting

The Booklet setting is given higher priority than the 2 Position Staple setting.
As an example, the procedure for setting the Booklet function after selecting
the 2 Position Staple setting is described below.
1
Select the 2 Position Staple setting.
2
Set the Booklet function.
The first 2 Position Staple setting is automatically cancelled, and the
second Booklet function becomes effective.
To enable the 2 Position Staple setting instead, cancel the Booklet
function.
2-64
Before Making Copies
bizhub 360