To Specify A Desired Zoom Ratio - Konica Minolta bizhub 360 User Manual

3
3
Touch [OK].
The Basic Screen will be restored with the specified magnification ratio
displayed on the Zoom key.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Basic
Screen.

To specify a desired zoom ratio

A desired magnification ratio can be specified within the range from ×0.250
to ×4.000, in order to make a copy in the same height-to-width proportion as
the original.
0 Use the control panel keypad to enter the desired magnification ratio,
within the range from ×0.250 to ×4.000 in ×0.001 increments.
0 Entered ratio can be registered. For details, see "To store a zoom ratio"
on page 3-41.
0 Use the [+] and [–] keys on the Zoom Screen to make a fine adjustment
on the specified magnification ratio. Touch [+] to increase, or [–] to de-
crease the ratio in 0.001 increments.
1
Touch [Zoom] on the Basic Screen.
3-34
Basic Copy Operations
bizhub 360