Automatically Conserving Energy (Sleep Mode) - Konica Minolta bizhub 360 User Manual

2
!
Detail
Originals can be scanned while the machine is warming up. For details,
refer to page 3-62.
!
Detail
The length of time until the machine enters Low Power mode can be
changed. For details, refer to page 15-25.
If the time for entering Low Power mode and Sleep mode are the same,
the machine will immediately enter Sleep mode without entering Low
Power mode.

Automatically Conserving Energy (Sleep Mode)

If no operation is performed for a specified length of time, the touch panel
goes off and the energy consumption is reduced to under 2.2 W, the state
where the energy conserved is greater than the Low Power mode.
The [Power Save] key and the main power indicator light up in green, and the
touch panel and all the other indicators go off.
This is the Sleep mode.
Although the machine conserves more energy in Sleep mode than in the Low
Power mode, it needs to take longer than Low Power mode to warm up when
Sleep mode is cancelled before getting ready to print again.
The machine can receive jobs even while it is in the Sleep mode.
As the factory default, the machine enters the Sleep mode after 15 minutes.
2-36
Before Making Copies
bizhub 360