Before Installing The Fax Driver (For Administrators); Checking A Lan Cable For Connection; Checking The Network Settings - Konica Minolta bizhub C3850FS User Manual

2.2

Before installing the fax driver (for administrators)

2.2 Before installing the fax driver (for administrators)
Connecting this machine to the network

Checking a LAN cable for connection

Checking the network settings

% Check that an IP address is assigned to this machine.
Set up the PC-Fax operating environment.
When using the Normal Printing (Port 9100)
% Make sure that the RAW port number has been set. (Usually, you can use the default settings.) Use
Normal Printing (Port 9100) unless otherwise specified.
When using the Internet Printing (IPP)
% Check the IPP operating environment. (Usually, you can use the default settings.)
When using the Secure Printing (IPPS)
% Set up the IPPS operating environment. Establish the communication with SSL encryption between
this machine and the computer.
Preparation finished
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this machine.
For details on the cable connection port, refer to page 1-5.
Checking the network settings
Print out the Configuration Page, then check that an IP address is assigned to this machine.
To print out the Configuration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Con-
figuration Page].
d
Reference
If no IP address is displayed, you need to set up the network. For details, refer to [Quick Start Guide].
bizhub C3850FS/C3850/C3350
2
2-4