4.4
Inserting the Paper
4.4.1
Inserting the Paper
1.
Turn on the power.
2.
Put your hands in the concave parts on both sides of the printer cover, and open it until it comes
to a stop.
3.
Cut the end of the paper roll at close to a right angle.
4.
Ensure that the paper roll is placed correct side up in the roller part in the upper cover.
5.
Check that the paper roll is between the platen levers, pull the end of the paper out to the edge
of the upper cover, and close the printer cover.
out the paper outlet of the printer.
6.
Cut the surplus paper by the tear bar at the paper outlet of the auto cutter.
Platen Lever
The paper is automatically fed in and comes
Platen Lever
Upper Cover
10
iDP3221 User's Manual
Concave Part
CITIZEN