Citizen iDP-3221 Series User Manual page 113

GS ^ n1
[Function] Executing the macro
[Code] <1D> H <5E> H <n1> <n2> <n3>
[Range] 0 n1 255
0 n2 255
0 n3 1
[Outline] Executing contents defined in macro.
• "n1 n3" indicate as follows:
Continuous execution:
Execution by FEED Switch:
[Caution] • When this command is received while in macro definition, suspension of macro definition
is indicated. At this time, the defined content is cleared.
• No execution takes place when macro is held undefined or n1=0.
• While in macro execution with n3=1, paper feed with the FEED switch is not available.
[Default] Initially, this command is not specified.
[See Also] GS :
[Sample Program]
See Sample Program and Print Results for GS : on page 87.
n2 n3
n1 : The number of times of macro execution
n2 : Waiting time on macro execution
Waiting time of n2 100 msec is given for every execution.
n3 : Macro execution mode
n3
0 Continuous execution
1 Execution by FEED Switch
Mode
The Macro is executed "n1" times continuously at the time
intervals specified by "n2."
After waiting for lapse of time specified by "n2", the ERROR
LED flickers and the FEED switch is waited to be pressed. When
it is pressed, the macro is executed once.
This action is repeated "n1" times.
[Print Results]
97
iDP3221 User's Manual
CITIZEN