4.7.2
Inserting the Paper Roll (Duplicable 2-sheet Paper) (iDP3423)
1.
See Steps 1 to 6 in 4.7.1 Inserting the Paper.
2.
Press the FEED switch to feed the paper until the end of the paper comes out of the paper outlet port
of the auto cutter by about 25 cm.
3.
Open the auto cutter and pull out the paper roll from it.
4.
Thread the journal paper (Copying paper) between the auto cutter and platen.
5.
Thread the receipt paper (Original paper) tightly through the auto cutter, close the cutter, and cut the
surplus receipt paper by the tear bar.
6.
Insert the end of the journal paper into the slot in the winding reel and set onto the reel holder .
7.
Turn the winding reel to tighten the receipt paper.
8.
Close the printer cover.
CAUTIONS :
Winding Reel
Winding
Direction
If the paper is still slackened, wind it back to eliminate slackness.
If the paper is set slantly, operate the paper free lever to correct a paper positio n.
Do not hold the paper while printing.
When closing the auto cutter, do so gently not to give a shock.
Journal Paper
Paper Roll
(Duplicable 2-sheet Paper)
Paper Path (Duplicable 2-sheet Paper) Illustration Drawing
It could cause a paper jam.
Auto Cutter
Receipt Paper
15
iDP3420/3421/3423 User's Manual
Printer Mechanism
CITIZEN