4.8
Cleaning the Head
1. Remove the platen roller unit referring to 4.6 "Eliminating the Paper Jam."
2. Clean the heating surface of the head by wiping it with a cotton swab dampened with a small amount of
ethyl alcohol.
3. Attach the platen roller unit.
CAUTION:
• Do not touch the heating surface of the head with a bare hand or metal.
•
Do not carry out this work just after printing because the printing head is very hot.
•
Always turn off the power before removing the platen roller unit.
Platen Roller Unit
Heating Surface of the Printing Head
Emergency Knob
17
iDP3221 User's Manual
CITIZEN