Operation Panel And Display Of Error - Citizen iDP-3221 Series User Manual

4.9

Operation Panel and Display of Error

1. POWER lamp (Green)
Illuminated if the power is turned on.
2. ERROR lamp (Red)
Indicates an error by illuminating or blinking the lamps.
Error
Memory check error
Cover open
Head overheat
Paper near end
Paper end
Cutter motor lock
Macro execution wait
<Error Details>
Cover open
Head overheat
Paper near end
Paper end
POWER Lamp
Quick blinking
ON
ON
ON
ON
ON
ON
----- Opening of the printer cover is detected by the printer cover open sensor.
ERROR lamp is then lit and print operation is halted.
may be set to allow paper feed while the printer cover is open.
----- If the temperature of the printing head rises (about 65 C or more), in order to protect
it against overheating, a printing head temperature sensor will be activated to stop
printing. If the temperature drops (about 60 C), printing will be automatically
resumed.
----- When the paper roll reaches a set diameter, the ERROR lamp is lit by the paper near
end sensor located on the side of the roller part of the upper cover.
function of the control codes ESC c3 and ESC c4 in "PRINT CONTROL
FUNCTION.")
----- When the paper roll runs out, the paper sensor located in the paper path near the
printing head detects paper end and the ERROR lamp is lit, resulting in halting
printing. (See the function of the control codes ESC c3 and ESC c4 in "PRINT
CONTROL FUNCTION.")
the paper roll begins.
Also, f l ashes to indicate a memory error.
ERROR Lamp
ON
ON
ON
ON
Quick + Slow
blinking
Slow blinking
When paper is inserted into the paper path, loading of
18
iDP3221 User's Manual
Reset
Cannot be reset
Close the cover.
Automatically reset by a
temperature drop
Set a new paper roll after a print
stop.
Set a new paper roll.
Eliminate a paper jam.
Press the FEED switch.
Note that the DIP switch
The
(See the
CITIZEN