Citizen iDP-3221 Series User Manual page 111

(2) If a sufficient area cannot be provided as a result of step (1), the print area is extended
(3) If a sufficient area cannot be provided as a result of step (2), the right spacing is
• When mapping a bit image (or downloaded bit image), if the print area is narrower than the
minimum width of the bit image (two dots for single density, or one dot for double density),
only the line for that image is handled as follows:
(1) The print area is extended toward the left (so that the left margin is decreased) until it
[Default] nL = 0, nH = 2
[See Also] GS L, GS P
toward the left (so that the left margin is decreased).
The left margin is trimmed.
trimmed.
is equal to the minimum width of the image, but not wider than the printable area.
Printable Area
Left Margin
95
iDP3221 User's Manual
Extended toward
the right
Print Area Width
CITIZEN