Citizen iDP-3221 Series User Manual page 109

GS V m ......... (1)
GS V m
[Function] Cutting the paper
[Code] (1)
(2)
[Range] (1)
(2)
[Outline] Cuts the specified paper.
"m" means the following.
[Caution] • In Standard mode, this command only works when it is entered at the beginning of a line.
For (1):
• A partial cut (leaving a bridge area uncut) is executed.
For (2):
• If n = 0, the paper is fed to the cut position, and then cut. If n 0, the paper is fed by
"n basic calculation pitch" inches past the cut position, and then cut.
• The basic calculation pitch is set by GS P.
The paper feed amount is calculated with the vertical basic calculation pitch (y). A
fractionresulting from the calculation is corrected with the minimum pitch of the
mechanism, and the remainder is omitted.
n ... (2)
<1D>H<56>H<m>
<1D>H<56>H<m><n>
0 m 1, 48 m 49
65 m 66, 0 n 255
m
Full cut
0,48
Partial cut (leaving a bridge area uncut)
1,49
Paper feed by "cut position + {n basic calculation pitch} and full cut
65
Paper feed by "cut position + {n basic calculation pitch} and partial cut
66
(leaving a bridge area uncut)
Meaning
93
iDP3221 User's Manual
CITIZEN