Esc A N - Citizen iDP-3221 Series User Manual

ESC a n
[Function] Aligning the characters
[Code] <1B> H <61> H <n>
[Range] 0 n 2, 48 n 50
[Outline] All the printed data within one line are aligned in the specified position.
• Depending on "n" value, positional alignment is carried out as in the table below:
[Caution] • This is valid only when "n" is inputted at the beginning of line.
• This command does not affect the Page mode.
[Default] n = 0
[Sample Program]
LPRINT CHR$ (&H1B) ; "a" ; CHR$ (0) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; "a" ; CHR$ (1) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; "a" ; CHR$ (2) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;
END
[Print Results]
n
0,48
1,49
2,50
Position
Left end alignment
Centering
Right end alignment
73
iDP3221 User's Manual
CITIZEN