Citizen iDP-3221 Series User Manual page 75

ESC n
[Function] Data input control
[Code] <1B> H <3D> H <n>
[Range] 0 n 255
[Outline] Selecting equipment in which data input from the host is effective.
• Each bit of "n" indicates as follows:
• When the printer has not been selected, this printer abandons all the received data until it is
selected by this command.
[Caution] • Even when the printer has not been selected, it can become BUSY state through printer
operation.
• When the printer is deselected, this printer discards all the data until it is selected with this
command.
[Default] n = 1
[See Also] DLE ENQ
[Sample Program]
LPRINT "AAAAA" ;
LPRINT CHR$ (&H1B) ; "=" ; CHR$ (0) ;
LPRINT "aaaaa" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; "=" ; CHR$ (1) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;
Bit Equipment
0 Printer
1 Not defined
2 Not defined
3 Not defined
4 Not defined
5 Not defined
6 Not defined
7 Not defined
(Except DLE ENQ1 and DLE ENQ2)
Value
0 1
Invalid Valid
[Print Results]
59
iDP3221 User's Manual
CITIZEN