Citizen iDP-3221 Series User Manual page 65

ESC ! n
[Function] Collective specifying the printing mode
[Code] <1B> H <21> H <n>
[Range] 0 n 255
[Outline] Printing mode is assigned.
[Caution] • With double height and double width being specified simultaneously, double wide and
double high characters are consisted.
• An underline is attached to the full character width, which, however, is not attached to the
part having been skipped by the horizontal tab. Neither is it attached to 90 -right-turned
characters.
• The underline width is as having been specified by the "ESC " command.
setting is 1 dot width. )
• Specification with this command is invalid to Kanji, except specification and cancellation of
highlighting.
• In case that double wide character and normal character exist in same one line, the layout of
underline is consistent one.
[Default] n = 0
[See Also] ESC E, ESC , GS !
[Sample Program]
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H00) ; "H" ;
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H01) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H08) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H10) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H20) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H80) ; "H";
LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&HB9) ; "H";
LPRINT CHR$ (&HA) ;
END
Bit Function
0 Character Font
1 Undefined
2 Undefined
3 High-lighting
4 Double height
5 Double width
6 Undefined
7 Underline
Each "n" bit indicates the following:
0
Font A
Canceled
Canceled
Canceled
Canceled
49
iDP3221 User's Manual
Value
1
Font B
Specified
Specified
Specified
Specified
(The default
CITIZEN