4.2
Connecting Interface Cable
1. Turn off the power.
2. Check the top and bottom of cable terminals, and connect to the interface connector.
3. Fix the cable terminals.
4. Connect the cable to the host computer.
Serial Interface Cable
4.3
Connecting the Drawer Kick-Out Connector
1. Turn off the power.
2. Check the top and bottom of the drawer kick-out cable connector and connect it to the drawer kick-out
connector located on the back of the printer.
3. Screw the grounding cable of the drawer to the grounding terminal of the printer.
CAUTION:
• Connect only the prescribed drawer (Solenoid) to the drawer kick-out connector.
(Do not connect a telephone line.)
Drawer Kick-Out Cable Connector
(Mating side included)
Serial interface
Parallel interface
: Tighten screws, to fix it.
: Turn clamps, to fix it.
Serial Interface Connector
Parallel Interface Connector
Clamp
Parallel Interface Cable
Grounding Cable
9
iDP3221 User's Manual
Drawer Kick-Out Connector
CITIZEN