Esc C 3 N; Esc C 4 N - Citizen iDP-3221 Series User Manual

ESC c 3
[Function] Selecting the paper near end sensor valid for a paper end signal output
[Code] <1B>H<63>H<33>H<n>
[Range] 0 n 255
[Outline] This command selects at which paper near end sensor a paper end signal should be output.
Each bit for "n" has the following meaning:
This printer can only select one kind of paper end detection, a paper-near-end sensor.
valid for the least significant bit (n0).
[Caution] This command is valid only for the parallel interface.
[Default] n = 0
[Sample Program]
LPRINT CHR$(&H1B);"c3";CHR$(0);
LPRINT CHR$(&H1B);"c3";CHR$(1);
ESC c 4
[Function] Selecting the paper near end sensor valid for print stop
[Code] <1B>H<63>H<34>H<n>
[Range] 0 n 255
[Outline] This command selects at which paper near end sensor printing should be stopped.
for "n" has the following meaning:
This printer can only select one kind of paper-end detection, a paper-near-end sensor.
is valid for the least significant bit (n0).
[Default] n = 0
[Sample Program]
LPRINT CHR$(&H1B);"c4";CHR$(0);
LPRINT CHR$(&H1B);"c4";CHR$(1);
n
Bit Position
0 Paper near end
1 7 Undefined
•••••••When outputting the paper-end signal at the paper end
•••••••When outputting the paper-end signal at the paper near end
n
Bit Position
0 Paper near end
1 7 Undefined
•••••••When stopping printing at the paper end
•••••••When stopping printing at the paper near end
Value
0
Disabled Enabled
Value
0
Disabled Enabled
74
iDP3221 User's Manual
1
1
"n" is
Each bit
"n"
CITIZEN