ESC
S
[Function]
Selecting Standard mode
[Code]
<1B>H<53>H<n>
[Outline]
Switches from Page mode to Standard mode.
[Caution]
• This command is only effective if it is entered when in Page mode.
• Any data mapped in Page mode is erased.
• After this command is executed, the beginning of the line is taken as the start position for
the next print command.
• The print area defined by ESC W is initialized.
• The commands listed below, which have separate settings for Standard mode and Page
mode, are changed to the settings for Standard mode use.
• Standard mode is selected when the printer is turned on or when ESC @ is executed.
[See Also]
FF, ESC FF, ESC L
(1) Spacing setting:
(2) Line feed width setting:
ESC SP
ESC 2, ESC 3
67
iDP3221 User's Manual
CITIZEN