Citizen iDP-3221 Series User Manual page 136

APPENDIX 1.
Overview
The printer has two print modes: standard and page.
In standard mode, the printer prints or feeds paper each time it receives a print or paper feed command.
mode, when the printer receives print commands and/or form feed commands, it simply forwards them to the
specified print area of memory.
until then be printed in a batch.
The printer enters page mode with an ESC L, so that all commands received after that point are handled in page
mode. When an ESC FF is executed, the data received until then is printed in a batch. When an FF is executed,
the data received until then is printed in a batch, after which the printer returns to standard mode.
causes the printer to immediately return to standard mode; any print data, however, that has been stored in page
mode is not printed.
Standard Mode
[Switching Between Standard Mode and Page Mode]
Command values in standard mode and page mode:
(1) The values set with commands are common to the standard and page modes.
four commands listed below are, however, treated differently and stored separately for the standard and page
modes.
ESC SP, ESC 2, ESC 3, FS S
PAGE MODE
Only when an ESC FF or FF is executed, will all data mapped in the print area
Instead it shall be deleted.
Print
Page Mode
120
iDP3221 User's Manual
An ESC S
Print
The values set with any of the
CITIZEN
In page