Inserting The Paper Roll - Citizen iDP-3310 User Manual

Serial thermal printer
Table of Contents

Advertisement

4.4 Inserting the Paper Roll

CAUTION :
(1) Holding the projections on both sides of the printer cover, open it until it stops.
(2) Cut the end of paper roll approximately at a right angle.
CAUTION :
(3) Confirming winding directions of paper roll, put it on the paper hook of the upper cover.
(4) Turn ON the power switch.
(5) Insert the tip of paper roll straight into the paper inlet (as indicated by an arrow on the case).
(6) Paper is automatically pulled into the mechanism and paper comes out from paper outlet slightly. Feed the
paper with feed switch and cut the extra paper if needed.
(7) Remove the slack of the paper and close the printer cover.
Print quality and reliability may not be guaranteed if you use paper that is not specified
in this manual.
The printer cover is not detachable. Do not try to further open beyond the stop
position.
Do not insert paper roll with its end frayed or bent.
12
iDP3310 User's Manual
CITIZEN

Advertisement

Table of Contents
loading

Table of Contents