Esc T N - Citizen iDP-3221 Series User Manual

ESC T n
[Function] Selecting the character printing direction in Page mode
[Code] <1B>H<54>H<n>
[Range] 0 n 3, 48 n 51
[Outline] Selects the direction and start position of character printing in Page mode.
0,48
1,49
2,50
3,51
[Caution] • When Standard mode is selected, this command only executes the internal flagging of the
printer without affecting the printing in Standard mode.
• The character mapping position will be the start position in the print area specified by ESC
W.
• The basic pitch (x or y) used by the following commands varies with the start point.
[Default] n = 0
[See Also] "Page Mode" in Appendix 1
ESC $, ESC L, ESC W, ESC ¥, GS $, GS P, GS ¥
n
Printing direction
Left to right
Bottom to top
Right to left
Top to bottom
(1) If the start point is the top left or bottom right (the characters are mapped in the
direction perpendicular to the paper feed).
• Commands using x:
• Commands using y:
(2) If the start point is the top right or bottom left (the characters are mapped in the paper
feed direction).
• Commands using x:
• Commands using y:
Top left ("A" in the figure)
Bottom left ("B" in the figure)
Bottom right ("C" in the figure)
Top right ("D" in the figure)
Paper Feed Direction
Print Area
ESC SP, ESC S, ESC ¥
ESC 3, ESC J, GS S, GS ¥
ESC 3, ESC J, GS S, GS ¥
ESC SP, ESC S, ESC ¥
68
iDP3221 User's Manual
Start point
CITIZEN