Citizen iDP-3221 Series User Manual page 94

ESC p m
[Function] Generating the specified pulses
[Code] <1B>H<70>H<m><n1><n2>
[Range] m = 0, 1
0 < n1 n2 255
[Outline] The signals specified by "n1" and "n2" are output to the connector pin specified by "m".
• "m" has the followings.
• The ON time is n1 2 ms, and OFF time n2 2 ms.
[Caution] • When "m" is beyond a definition range, no signal is output, discarding "n1" and "n2."
• A drawer drive duty is as follows.
[Default] The initial value for "m", "n1" and "n2" is not defined.
[Sample Program]
LPRINT CHR$ (&H1B) + "p"
LPRINT CHR$ (0) ; ••••••• Selects pin No. 2.
LPRINT CHR$ (5) ; ••••••• Sets ON time to 10ms
LPRINT CHR$ (50) ; ••••••• Sets OFF time to 100ms
END
n1 n2
m Connector Pin
0 Drawer kick pin No.2
1 Drawer kick pin No.5
ON time
ON time + OFF time
(The OFF time should be 4 times or more larger than the ON time.)
0.2
78
iDP3221 User's Manual
CITIZEN