Two- And Three-Piece Driveline - Meritor MM-96147 Maintenance Manual

Two- and Three-Piece Driveline

A two- or three-piece driveline is comprised of one or two non-slip coupling shafts followed by a standard slip drive shaft assembly. The non-slip
coupling shafts are always positioned in front of the slip shaft. Figure 2.2.
TRANSMISSION
END YOKE
OUTPUT
WELD
YOKE
Fig. 2.2
(16579)
Printed in USA
TYPICAL THREE-SHAFT STANDARD SLIP
ASSEMBLIES
CENTER
BEARING
BEARING
TUBING
STUB
WELCH PLUG
Copyright Meritor, Inc., 2021
NON-SLIP
COUPLING
SHAFT
STANDARD
SLIP ASSEMBLY
SPLINED
YOKE
KIT
SEAL
SLIP
WITH
YOKE
SHROUD
2 Drivelines
SPLINE TUBING WELD
PLUG YOKE
4004043a
MM-96147 / Revised 03-21
Page 7