Table of Contents
Advertisement
5
RPL Series Permalube
Universal Joint
CAUTION
Do not use grease or anti-seize compound in the yoke ear bores.
Damage to components can result.
1.
Clean dirt and contamination from the slip yoke and weld yoke
ear bores. Figure 5.51.
WELD YOKE
CAPSCREWS (EIGHT TOTAL)
SLIP YOKE
UNIVERSAL
JOINT CROSS
Fig. 5.51
2.
Install the universal joint into the yoke so that the wing bearing
weld straps face INBOARD and the arrows point toward the
end or coupling yokes. Figure 5.52.
MM-96147 / Revised 03-21
Page 30
END YOKE
Align yoke nib with
square button on
universal joint kit
as shown.
Strap must face AWAY
from end yoke as shown.
Copyright Meritor, Inc., 2021
At installation the wing bearing
weld strap must face INBOARD.
At installation
directional arrows
face OUTBOARD
(toward end yoke).
Install the
universal joint
kit by inserting
both of the
wing bearing's
machined
keyways into
the yoke. Tap
cups into place
before you
tighten
capscrews.
4001807c
(16579)
Printed in USA
Advertisement
Table of Contents
