Ricoh SP 8400DN Field Service Manual page 72

appliance.
Only one encryption level can be set for an external appliance for its communication with imaging devices. If a
512 bit encryption level Ricoh device (HTTPS Managed) is registered, the external appliance as well as other
devices must also use 512 bit encryption even if 2048 bit encryption is supported on those devices.
Workaround
For Condition 1:
Advise your customer to change to the latest appliance that supports 2048 bit encryption level communication.
For Condition 2:
1. Manage the device with embedded RC Gate (2048 bit)
2. Exclude non-supported devices (i.e., those devices that cannot be changed from 512-bit to 2048-bit) from the
external appliances, then change the encryption level of external appliances and all managed devices (from 512 bit
to 2048 bit).
Specifying the Time and Day of the Week to Prohibit Updating via Web Image Monitor
1. Start Web Image Monitor.
2.
Log in as the machine administrator.
3.
Point to [Device Management], and then click [Configuration].
2.Installation
57