Daily Shut Down (Sleep) (When Connected To Cs-2) - Konica Minolta REGIUS 190 Operation Manual

Daily Shut Down
(When connected to CS-2)
REGIUS MODEL 190 is automatically shut downed when the CS-2 is shut downed.
The following is a description of the procedure for turning OFF the REGIUS MODEL 190 through
the CS-2. For more details, refer to the CS-2 Operation Manual.
The illustration at left shows
the screen display when the
"Image Confirm" screen has
been set as the initial
screen.
It is usually not necessary to
switch OFF the power
breaker when shutting down
the unit. The power breaker
should be switched OFF
only when the unit is not to
be used for an extended
period.
p.41 Power Off
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
[KONICA MINOLTA] Button
[Shutdown] Button [Back] Button
In cases where the image data is being transmitted to externally connected
devices, a message will be displayed. The system will be shut down upon
completion of data transmission. If there is any unsent image data, at the
time when the system is shut down, such data will be transmitted next time
the CS-2 starts.
(Sleep)
1
Touch the "KONICA MINOLTA" button.
• This will produce display of the system
menu.
2
Touch the "Shutdown" button of the
System Menu.
• Confirmation Message will be displayed.
3
Touch the "YES" button.
• The CS-2 will be shut downed.
• To abort the system shut down process,
touch the "NO" button and then the "Back"
button on the system menu. This will result
in abortion of the shut down process and
return to the initial screen.
• Upon shut down of the CS-2, the sleep
mode will be engaged.
40