Konica Minolta REGIUS 190 Operation Manual page 57

INITIALIZING...
READY
5
Remove the foreign object from the
cassette insertion slot by hand.
6
Return the insertion guide to its
original position.
• Initialization will automatically start.
• The message "INITIALIZING" together
with a counter "■ ■ ■ • • • " will appear
on the LCD panel. Upon completion of
initialization, the message "READY"
will be shown on the LCD panel.
• The REGIUS MODEL 190 is now ready
for use.
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
55
Be careful not to allow the
insertion guide to fall onto
the original position.
If the foreign objects are
difficult to remove by hand,
discontinue operation of the
REGIUS MODEL 190 and
contact your Technical
Representative.