Operation Procedure; (Without Data Management Software Cs-S10W) - Konica Minolta CHROMA METER CS-200 Instruction Manual

Operation Procedure

Setting Necessary for Object Color Measurement
1.
Set one or more tungsten lumps
or equivalent as illumination
source toward white calibration
plate as in the right illustration.
• Set this instrument vertical
to white calibration plate.
• Keep the angle between
illumination light source and
white calibration plate at 45˚.
White Calibration
2.
Perform user calibration.
See p.64 for details.
Measurement of Object
3.
Set object on the same position and at the
same angle as white calibration plate.
4.
Now, measurement can be done.

(Without data management software CS-S10w)

White calibration plate
107
Illumination
Light Source
45°
45°
TARGE T
MEMORY
KEY L OCK
SHI F T
Illumination
Light Source
ＣＯＬＯＲ PEAK/VALLEY ＳＨＵＴＴＥＲ
MEAS S PEED ABS/DI F F BACKLI G HT
CHAR M ODE RECALC
MENU ESC ENTER