Konica Minolta REGIUS 190 Operation Manual page 23

Rear Side
Ethernet Port
Insert the Ethernet
cable into this port to
connect the reader to
the CS-1/CS-2/CS-3 or
network.
AC Inlet
Insert the power cable
here.
Exhaust Outlet
To prevent temperature
increase inside the device,
cleaning should be carried
out regularly following
procedures described in
Chapter. 5 "Care &
Maintenance."
p. 57
Care&Maintenance
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
21
Blocking the exhaust outlet
will cause increase in the
temperature inside the
device and consequent
damage.