Konica Minolta REGIUS 190 Operation Manual page 18

Cautions Regarding Care and Maintenance of
the Unit
NOTE : If the contents of this page are not legible, order a new manual.
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
● Do not attempt to disassemble or to carry out repairs or modification
to the unit.
Under no circumstances should the user attempt to disassemble or to carry out any
repairs or modifications to the unit. Any attempts to do so may result in
malfunctioning of the unit and produce the risk of electrocution or fire. Should
repairs become necessary,contact your Technical Representative.
● Do not remove the lithium batteries.
The REGIUS MODEL 190 incorporates a lithium battery which the user should not
attempt to remove. Lithium batteries may explode if exposed to fire or water.
Additionally, if the unit begins to malfunction due to expiry of the life of the lithium
battery, under no circumstances should the user attempt to disassemble, change or
recharge the battery him/herself: contact your Technical Representative.
● Do not handle the unit with the power plug connected to the power outlet.
Maintenance procedures should only be carried out after the power has been
switched off and the power plug disconnected from the power outlet. For example,
even with the power broken off, contact with internal components may still result in
electrocution if the power cable has not been disconnected from the power outlet.
Additionally, the power plug should be occasionally disconnected and any dust or
dirt removed using a dry cloth. If dust and dirt are allowed to accumulate on the
power plug, even a drop of water may result in overheating and consequent fire.
● Cables should be connected properly.
Be sure to connect the power and Ethernet cables properly. inappropriate
wiring may result in poor connection producing overheating and the
consequent risk of smoke or fire.
● Cleaning should be carried out in accordance with information set
out in sections on "Care & Maintenance".
• Cleaning must be carried out according to the procedures described in
this manual. Otherwise it may lead to injury or damage to the device.
• The REGIUS MODEL 190 must be checked periodically in order to
ensure safety during usage.
• The REGIUS MODEL 190 must be checked for malfunction when
operation is resumed after an extended period of idleness.
WARNING
CAUTION
16