Konica Minolta REGIUS 190 Operation Manual page 10

Alert and Symbol Marks
This is the safety alert symbol and is intended to draw the attention
of the user to potential dangers to the user him/herself or to others
that may arise during the use or operation of this system.
These messages must be read thoroughly and strictly observed.
All safety related precautions should be carefully read and fully
understood before proceeding with assembly or usage of this
system.
● Symbols indicating the need for caution (including danger and warnings)
● Symbols indicating prohibited acts
● Symbols indicating essential acts (compulsory or indicated acts)
● Other Symbols
NOTE : If the contents of this page are not legible, order a new manual.
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
Safety Alert Symbol
Description of Graphic Symbols
Normal caution Danger of fire
Prohibited Do not touch
Ground
Remove the plug from
the power outlet
AC voltage
Main power supply OFF Main power supply ON
(power supply)
Danger of electrocution
Do not disassemble Do not touch
with wet hand
Power supply standby
8
Do not expose to
moisture