Konica Minolta REGIUS 190 Operation Manual page 60

Direct digitizer
Hide thumbs Also See for REGIUS 190:
Table of Contents

Advertisement

Care & Maintenance
In order to ensure optimum performance, care and maintenance should be carried out following the
procedures detailed below.
Before cleaning, be sure to
power off the power
breaker and disconnect the
power cable from the power
outlet.
p.41 Power Off
Do not clean the cassette
stacker using a cloth
dampened with volatile
liquids like a thinner or
alcohol. This may damage
the stacker.
Do not clean the LCD with a
damp cloth. If water gets into
the LCD panel, a breakdown
may occur.
Be careful not to damage
the main unit when using a
vacuum cleaner.
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
Cassette Stacker
LCD Panel
Exhaust Outlets
58
1. Cleaning of the Cassette Stacker
Clean the cassette stacker with a dry
soft cloth. The stacker should always
be kept clean.
2. Cleaning of the Exterior
Gently wipe dust or stains from the
main unit with a dry cloth.
Stubborn stains should be wiped with a
damp cloth then with a dry cloth.
3. Cleaning of the Exhaust outlet
Remove dust on the rear side of the
main unit or in the exhaust outlet with a
vacuum.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

0676

Table of Contents