Installing A Sata Hard Drive; Removing A Hard Drive Carrier From A Hard Drive Bay - Bosch DIVAR IP all-in-one 7000 3U Quick Installation Manual

22 en | Installing a SATA hard drive
6

Installing a SATA hard drive

The unit has hot-swappable hard drives, which can be removed without turning off the system.
The hard drives are mounted in hard drive carriers to simplify their installation and removal
from the chassis. These hard drive carriers also help promote proper airflow for the hard drive
bays.
Procedure
To install a hard drive, you have to perform following steps:
1.
2.
3.
6.1

Removing a hard drive carrier from a hard drive bay

To remove a hard drive carrier from a hard drive bay:
1.
2.
2
Notice!
i
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
2021.10 | V02 | DOC
Removing a hard drive carrier from a hard drive bay, page 22 .
Installing a hard drive into a hard drive carrier, page 23 .
Installing a hard drive carrier into a front drive bay, page 24 .
Press the release button to the right of the hard drive carrier. This extends the hard drive
carrier handle.
Use the handle to pull the hard drive carrier out of the chassis.
1
1 Release button 2
Quick installation guide
DIVAR IP all-in-one 7000 3U
Hard drive carrier handle
Bosch Security Systems B.V.