Configuring Atm/Pos Inputs - Bosch DB18C3100R2 Installation Manual

88 en | Default Configuration
6.5.9

Configuring ATM/POS Inputs

Inputs and outputs menu > ATM/POS- Inputs tab
The ATM/POS-Bridge is used to connect cashpoint systems and ATMs. The video system can
be connected to a maximum of 8 ATM/POS-Bridges, each with 4 ATMs. The video is connected
via the IP network (LAN).
1
2
3
4
5
6
7
F.01U.033.308 | V7 | 2009.09
ATM/POS inputs
Devices:
IP address:
Devices port number:
Port number:
Data structure:
Edit
Installation Guide
Click the tab.
Select the device.
Enter the IP address of the ATM/POS-Bridge.
Enter the port number of the ATM/POS-Bridge.
Enter the DiBos port number.
Shows the structure of the data stream that is sent to
DiBos by theATM/POS-Bridge. It is possible to have a
maximum of 10 data fields as distinguishing factors.
The size of the data stream is limited to 7 kilobytes.
Note:
Each of the individual data fields can be activated by
selecting the relevant check box. If none of the check
boxes are selected, the entire data stream is written
in the first data field.
Click the button. A dialog box opens in which you can
configure the type of data field and the corresponding
start and end position in the data stream.
Note:
Mark in advance the rows to be processed under
Data structure.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH