FPΣ User's Manual
1
Upside-down
1
Air duct blocked
2
Input and output connectors face down
3
Input and output connectors on top
4
Horizontal installation of the unit
5
•
Do not install the unit above devices which generate heat such as heaters,
transformers or large scale resistors.
Installation space
•
Leave at least 50mm of space between the wiring ducts of the unit and other devices
to allow heat radiation and unit replacement.
•
Maintain a minimum of 100mm between devices to avoid adverse affects from noise
and heat when installing a device or panel door to the front of the unit.
≥
100mm
•
Keep the first 100 mm from the unit's front surface clear of objects to allow wiring and
the connection of the programming tool.
2
3
≥
50mm
≥
50mm
4
PLC
1
Other device
2
Panel door
3
6.1 Installation
5
67