Panasonic FPS Series User Manual page 315

Appendix
No. Name
414 COM port 2 - sending start code
COM port 2 - sending end code/reception done
414
condition
418 COM port 2 - receive buffer starting address
419 COM port 2 - receive buffer capacity
412 COM port 2 - modem connection
1)
For PLC Link, the communication format and baud rate settings are fixed:
Data length: 8 bits
Parity: Odd
Stop bit: 1 bit
End code: CR
Start code: No STX
Other system register settings will be ignored.
2)
FPG-COM4: For RS485 connections (COM port 1), the baud rate must be set in the system registers and with
the DIP switch.
298
Default Values
No-STX No-STX/STX
CR CR/CR+LF/ETX/None
2048 0–32762
0 0–2048
Disable Disable/Enable
FPΣ User's Manual