Panasonic FPS Series User Manual page 87

Installation and Wiring
Installation and removal
Installation and removal of the unit is similar to the procedure using DIN rails:
Installation:
Combining mounting plates
When combining several mounting plates, tighten the screws after joining all of the mounting
plates to be connected. Tighten all corner screws.
The following diagram shows the combination of the mounting plates AFP0811 and AFP0803
when the maximum number of expansion units is used:
17.5
CPU
1
70
4 x FP∑
30 30 30
Removal:
EXPANSION
CONNECTOR
AFP0811
AFP0803
3 x FP0
30 25
FPΣ User's Manual
25 25 12.5
[mm]