Panasonic FPS Series User Manual page 108

FPΣ User's Manual
Pole terminals with compatible insulation sleeve
For pole terminals, please consider the following specifications:
Cross-sectional area [mm
0.25
0.50
0.75
1.00
0.5 x 2
The tightening torque should be 0.22–0.25Nm or less. Use a screwdriver with a blade size of
0.4 x 2.5.
Wiring method
Procedure
1. Remove a portion of the wire's insulation
7mm
2. Insert the wire into the terminal block until it contacts the back of the socket
3. Turn the screw clockwise to fix the wire in place
2
] Size
AWG24
AWG20
AWG18
AWG18
AWG20 (for 2 pieces)
6.6 Wiring the Terminal Block
91